MPPD
MODULAR PORTABLE PROTECTIVE DEVICE
BSP designed and developed a portable security barrier which is completely modular in nature that can prevent vehicle ramming and pedestrian borne attacks, while helping protect people and property (on the protected side of the system) from lasers and projectiles that are commonly used to inflict bodily harm and property damage during domestic terrorism. The proprietary and innovative designs behind BSP’s Modular Portable Protective Device(MPPD) systems come from a long history in the Vehicle Barrier and Security Industry.
vehicle borne threat protection element
The MPPD system’s primary characteristic is the vehicle borne threat protection element. The MPPD system has been tested and certified to ASTM level M50 and M30 and is Department of Defense approved. With over a dozen ASTM real life crash tests performed, BSP was able to glean valuable information from our past while innovating and designing the MPPD system.
This is truly a one-of-a-kind barrier system that is unlike any other on the market. The BSP MPPD system can stop a 15,000 lbs. vehicle traveling at speeds from 30mph to 50mph within 1-7 meters. No other portable barrier on the market offers this range of crash test certification or capabilities.
vehicle borne threat protection element
The MPPD system’s primary characteristic is the vehicle borne threat protection element. The MPPD system has been tested and certified to ASTM level M50 and M30 and is Department of Defense approved. With over a dozen ASTM real life crash tests performed, BSP was able to glean valuable information from our past while innovating and designing the MPPD system.
This is truly a one-of-a-kind barrier system that is unlike any other on the market. The BSP MPPD system can stop a 15,000 lbs. vehicle traveling at speeds from 30mph to 50mph within 1-7 meters. No other portable barrier on the market offers this range of crash test certification or capabilities.
Easily Deployed
The MPPD can be rapidly deployed, moved and stored with minimal equipment. The typical layout between stanchions is 42ft (6 equal sections).
100% Above Ground
The rapidly deployable system can easily configure for alignment changes on your site as no digging or foundations are required.
Modular Design
The vehicle barrier was designed with mounting brackets for our anti-cut/anti-climb security partition and safety shield to protect people and property during riots.
This is a 100% above ground system that can be rapidly deployed as well as demobilized after use.
In addition to our permanent barrier product lines, BSP designed and manufactured a truly revolutionary vehicle/pedestrian barrier system that is completely modular and portable. Simply put, this product is the first of its kind and will change the way we mitigate threats and secure our assets.